Designed for a coastal environment, this XeteX custom Energy Recovery Unit (ERU) is one of three units in this project.
Unique features include integral DX refrigeration with dual refrigerant circuits, AHRI-certified aluminum crossflow plate energy recovery, multi-stage filtration, and AMCA-certified dampers.
Let'st's take a look at performance and see what's inside.
Model: IAQ 5000-RT-DX-AC
Dimensions: 88”H x 240”L x 92”W
Weight: 7,300 lbs
Supply CFM: 5,000 CFM
Cooling Type: DX Cooling Coil
Cooling Capacity: 35 Tons
Energy Recovery: Flat Plate Heat Exchanger
Energy Effectiveness: Summer: 54.1%
Outdoor unit with thermal break construction
2” double-wall casing and injected foam (R-value 14) insulation;
0.063” aluminum outer casing; 0.063” aluminum interior casing
0.063” aluminum floor with 2” injected foam (R-value 14) insulation
Welded 8” structural aluminum base frame with lifting lugs
304 SS drain pan
Epoxy-Coated Flat Plate Heat Exchanger
Coastal environment cabinet construction
Exhaust plenum with OA bypass to allow for unit turndown
Certified for Seismic and Wind Load Conditions
Factory mounted controls
Exhaust stack with stabilizing cables
Supply and exhaust fans with aluminum construction, TEFC motors, shaft grounding, and seismic spring isolators
A. OA Intake with aluminum mesh filters
B. 2” MERV 9 OA pre-filter
C. 4” MERV 14 OA Filter
D. Flat Plate Heat Exchanger
E. DX Coil with SS Casing
F. SA 2-Fan Array
G. 2” MERV 9 RA Filter
H. EA 2-Fan Array
I. Air-Cooled Condensing Section
J. Built-in Electrical Cabinet