Custom AHU with Phenolic-coated Coils, Pre and Post Heat and 60K CFM

This XeteX project showcases a three-section split custom air handler for an athletic center. Unique performance features include a four-fan plenum array, 60K CFM, phenolic-coated HW and CW coils, and pre and post heat.

Performance

Model: XAH-60000-RT-CW-HW-RC
Dimensions: 150”H x 376”L x 116”W
Weight: 22,090 lbs
Supply CFM: 60,000 CFM
Heating Type: Hot Water Coil
Heating Capacity: Pre-heat: 3,634 MBH
Post-heat: 3,225 MBH
Cooling Type: Chilled Water Coil
Cooling Capacity: 2,147 MBH

Construction

• Outdoor three-section split unit
• 4” double wall thermal break construction with injected foam (R-value 28/in) insulation
  • 18ga galvanneal steel outer casing with acrylic paint
  • 22ga aluminum interior casing
• Welded 8” c-channel structural steel base frame with lifting lugs and acrylic paint
• 16ga aluminum floor with 4” PolyIso foam (R-value 6.0/in) insulation
• 304 SS drain pan 

Features

• Factory mounted Carel DDC Controller programmed for full unit control
• Phenolic-coated HW and CW coils
• Coil rack for stacked coils
• SA four premium fan plenum array with PIEZO flow rings

Components

A. OA 2” MERV 8 filters
B. Pre-heat phenolic-coated HW coils 
C. Phenolic-coated CW coils
D. Post-heat phenolic-coated HW coils 
E. SA premium four-fan plenum array
F. SA 4” MERV 14 filters
G. Unit splits

Learn more about XeteX custom air handling solutions!