This semi-custom AVENTUS by XeteX project showcases one of two split-DOAS units for an auto dealership. Unique features include 100% outdoor air, an energy efficient aluminum sensible crossflow plate heat exchanger, quality filtration throughout, and indirect gas fired furnace.
PERFORMANCE
Model: AVT-DD-60-60-RT-BP-HI
Dimensions: 92”H x 235”L x 92”W
Weight: 7,600 lbs
Supply CFM: 7,220 CFM
Energy Recovery: Sensible Crossflow Plate
Energy Effectiveness: Winter: 77% / Summer: 62%
Heat Type: Indirect Gas Fired Furnace
Heating Capacity: 350 MBH
CONSTRUCTION
- Outdoor unit
- 2” double wall foam board (R-Value 12) insulation
- 20ga galvanized steel outer casing with acrylic paint
- 20ga galvanized steel interior casing
- Welded 6” c-channel structural steel base frame with lifting lugs
- 16ga galvanized steel floor with 2” polyIso foam (R-value 12) insulation
FEATURES
- Aluminum crossflow bypass damper with actuator
- SA and EA fans: EC motor with 1” spring vibration isolation
- OA/EA galvanized mesh bird screen
- Filter pressure switch for all filter banks
- LED lights in fan and electrical sections
- 120V GFI Service Outlet
COMPONENTS
A. OA 2-position damper with actuator
B. SA 2” MERV 8 filters with galvanized rack
C. SA 4” MERV 13 filters with galvanized rack
D. Crossflow bypass damper with actuator
E. Aluminum sensible crossflow plate HX
F. SA two premium plenum fans
G. 409 SS indirect gas heat
H. RA 2” MERV 8 filters with galvanized rack
I. Gravity relief exhaust damper
J. EA two premium plenum fans
Learn more about AVENTUS semi-custom ERVs, Split DOAS and Packaged DX DOAS!
