XeteX Custom Air Handling Blog

Discover what's inside this innovative XeteX Dedicated Outdoor Air System (DOAS) designed to meet the structural load requirements of a federal facility with the needs of its occupants, contributing to clean air and a comfortable...

Discover how XeteX helped this downtown commercial building breathe better and reach its fullest potential through this innovative air handling and energy recovery ventilation solution.

Discover how this AVENTUS semi-custom split Dedicated Outdoor Air System (DOAS) is an energy efficient solution for a high school locker room.

In demanding healthcare environments, reliable HVAC performance is critical through precision climate control and indoor air quality. Learn how XeteX meets these needs for a healthcare center with this custom rooftop unit (RTU)...

HVAC system design for a waste water treatment plants (WWTPs) requires careful consideration of the unique environmental challenges to ensure: 1) safe operation with explosion-proof design; 2) system longevity with...

Learn how XeteX helps this community center pool natatorium breathe better through innovative HVAC design, material selection, and energy recovery. 

This AVENTUS by XeteX project showcases one of three semi-custom split-DOAS units for the hospitality industry and provides 10 tons of high efficiency cooling. Unique features include a VRF air source heat pump (provided by...

Creating an optimal learning environment is essential for student success and staff productivity. With students spending approximately 178.6 days per year in school, maintaining a comfortable indoor climate during warm and cool...

Designed for a hospital, this XeteX custom air handling replacement unit features an all-aluminum design, two-section split construction, 159 tons of packaged DX cooling, 45K CFM, and hot water coils for year-round climate...

This innovative hospital HVAC roof top unit (RTU) provides year-round climate and humidity control, 100% outdoor air and high efficiency filters for indoor air quality, and a non-corrosive design for long lasting performance....

Specifically designed for a school, this AVENTUS semi-custom split-DOAS unit features a non-corrosive aluminum construction. It is engineered to provide 100% outdoor air and incorporates a sensible crossflow flat plate heat...

Specifically engineered to meet the rigorous demands of a military barrack, this XeteX custom indoor Energy Recovery Unit (ERU) is outfitted with an epoxy-coated flat plate heat exchanger, which ensures optimal performance and...

Designed specifically for an auto dealership, this semi-custom AVENTUS split-system Dedicated Outdoor Air System (DOAS) features 100% outdoor air.

This XeteX project features one of four custom indoor air handlers for a community center. Unique features include a knockdown unit construction to accommodate a 7’H x 6.5’W pinch point; energy-efficient enthalpy flat plate heat...

Designed specifically for a laboratory application, this XeteX custom Roof Top Unit (RTU) features a high plume lab exhaust fan, epoxy-coated coils and a non-corrosive aluminum construction. 

This XeteX custom rooftop unit offers durability and longevity for a healthcare center. Many unique features include a five-section split design, full length service vestibule with tread plate floor, lights, and GFIs, energy...

This XeteX project showcases one of two custom rooftop units for a commercial building in a historic casino town. Unique performance features include 100 tons of packaged DX cooling, as well as split unit construction, and a...

This XeteX custom indoor energy recovery unit for a school natatorium features a corrosion-resistant design, an energy efficient flat plate heat exchanger, packaged refrigeration with a water source heat pump, and a dual heat...

As part of the Buy America Build America program, this XeteX Basis of Design project highlights one of 27 custom ERUs for airport terminal restrooms—equipped with energy recovery enthalpic flat plate heat exchangers.

Onalaska, WI (October 2024)—XeteX was one of four companies honored to receive the 2024 “Triangle of Achievement” award at the La Crosse Area Development Corporation (LADCO) Industry Appreciation event held October 29, 2024, at...

This XeteX project showcases a custom energy recovery unit for a school featuring an energy efficient enthalpy wheel positioned at a 90-degree angle and a water source heat pump to supply standard heating and cooling as well as...

This XeteX project showcases a three-section split custom air handler for an athletic center. Unique performance features include a four-fan plenum array, 60K CFM, phenolic-coated HW and CW coils, and pre and post heat.

Designed for an airport lighting vault this XeteX custom air handling unit features packaged DX cooling with epoxy-coated evaporator and condensing coils, electric heat, and SA/EA perf liners for sound absorption. 

This XeteX custom indoor air handler is suspended from the ceiling and is one of four units for a corrosion protection hangar. It features a pre-heat/pre-cool air-to-air ElectroFin coated wrap around heat pipe for energy savings....

This custom XeteX basis of design indoor dehumidifier utilizes a desiccant wheel to deliver dry air for a glass manufacturing production and storage area. Solid state desiccant is a proven method to reliably deliver much drier...

This XeteX project highlights one of two custom energy recovery units for a waste water treatment plant. For lasting performance in harsh conditions, this ERU includes aluminum construction, an epoxy-coated flat plate heat...

The new facility will double capacity, add jobs, and meet growing customer demands for high-quality custom air handling and energy recovery ventilation products across North America. 

This XeteX project highlights one of two custom RTUs for a hospital. Equipped with packaged DX refrigeration, a post hot water coil, and quality filtration throughout, this custom RTU is designed for energy efficient, year-round...

This custom indoor XeteX air handler delivers 10 tons of cooling capacity for a commercial facility. Featuring a ducted, air-cooled indoor condensing section, a plenum fan array is used in lieu of standard axial fans to handle...

Designed for pool natatorium dehumidification, this XeteX custom air handling solution is equipped with an energy recovery flat plate heat exchanger, packaged DX and indirect gas fired burner.

This XeteX custom energy recovery unit elevates the indoor climate comfort, air quality, and energy efficiency of a 21,210-square-foot public library. Equipped with an energy recovery wheel, electric heater, chilled water and hot...

This custom XeteX energy recovery ventilator is specifically designed for use in a medical laboratory setting.

This XeteX custom roof top unit with an energy recovery wheel is a high-quality solution that not only helps buildings breathe better but also enhances overall indoor climate comfort and energy efficiency for a prestigious...

Designed for a waste water treatment plant (WWTP) this XeteX custom Heat Recovery Ventilator (HRV) features an all-aluminum construction with explosion-proof design. It offers safe spark-free operation, equipment longevity,...

Designed for a 52,000-square-foot community center, this custom HVAC rooftop unit features ultra-quiet operation, enthalpy wheel and high efficiency filters for indoor air quality, and energy efficient year-round climate control.

Designed for a manufacturing facility, this XeteX custom air handler features an all-aluminum weight-savings design and 45K CFM for continuous climate regulation, humidity control, and enhanced indoor air quality.

Designed for a waste water treatment plant (WWTP), this XeteX custom make up unit (MAU) features an explosion proof design and non-corrosive aluminum construction.

Designed for an educational facility located near the ocean, this XeteX custom roof top unit features a non-corrosive aluminum design, packaged DX providing 37 tons of cooling, an indirect fired gas furnace, hot gas reheat, and a...

Equipped with dual energy recovery wheels, this XeteX indoor custom ERV is one of five for a 12-story office high-rise specifically designed for a low-delivered dewpoint of 42F. Paired with a chilled beam system, the XeteX units...

This XeteX custom air handling unit was specifically engineered to meet the demands of a Surgical Center and constructed for long-lasting performance. The integrated components of this AHU deliver efficient humidity control,...

Replacing a 15-year-old unit, this XeteX custom natatorium dehumidification Energy Recovery Unit was designed for a high school. It features an epoxy-coated aluminum sensible-only flat plate heat exchanger with up to 74%...

Instead of multiple air handling units, XeteX designed the heating, cooling, and humidity control in one custom Dedicated Outdoor Air System (DOAS) unit to condition an entire office facility. 

XeteX designs and manufactures custom air handling units to meet the needs of each application. This project features a custom heat recovery unit for a Waste Water Treatment Plant.

Designed for a waste water treatment plant, this custom heat recovery ventilator (HRV) is located at one of the most exclusive lifestyle estates in the world. The HRV is equipped with an epoxy-coated aluminum flat plate heat...

This project showcases XeteX innovative design and manufacturing capabilities featuring the largest of ten custom outdoor water source heat pump units with an impressive 267 tons of cooling capacity and 60K CFM. This project was...

This XeteX project features an outdoor custom energy recovery unit (ERU) for a K-12 school. One of the biggest challenges was attempting to capture an photo of this colossal custom Rooftop Unit measuring 98” H x 490” W x 396” L.

This XeteX custom air handling unit was specifically designed for a surgical suite to meet precise low dew point requirements featuring a desiccant dehumidification energy wheel, packaged DX refrigeration, and a steam humidifier...

Designed for a fragrance manufacturing application, this XeteX custom Dedicated Outdoor Air System (DOAS) features a flat plate heat exchanger and 120 tons of packaged DX cooling.

This large indoor 23,000 lbs. custom natatorium dehumidification energy recovery unit is an XeteX featured project due to its unique emphasis on the form factor.

Custom design engineering is useful for many instances including small form factor. This XeteX project features the smallest of nine indoor energy recovery ventilation units. All nine low profile units needed to be installed in...

This featured XeteX project is a custom Natatorium Dehumidification Energy Recovery Unit for a healthcare application with split unit construction for transportation. Unit weight, unit dimension, duct locations and electrical...

This XeteX project features two large rooftop replacement units with natatorium dehumidification for an indoor aquatic recreation center.

This featured XeteX project is a series of eight custom outdoor Air Handling Units with desiccant dehumidification designed for a Medical application. One of the key highlights of this unit is the active regen wheel, which...

Situated on a Times Square New York City skyscraper is this XeteX custom air handling replacement unit providing 200 tons packaged DX cooling with advanced sound absorbing technologies.

Specifically designed and manufactured for a prestigious Fortune 100 corporate headquarters, this XeteX custom Air Handler offers unparalleled energy efficiency, reliable performance, and enhanced indoor air quality. 

Discover how XeteX custom air handling solutions can elevate your HVAC systems! See inside this custom air handler featuring packaged DX and a humidifier designed for aerospace/defense manufacturing.

This XeteX project features a custom energy recovery ventilator with an aluminum flat plate heat exchanger for a pharmaceutical manufacturer.

This XeteX project features five large outdoor energy recovery units to help tackle this casino’s ventilation challenges.

This custom six section split XeteX energy recovery unit features chilled water, hot water coils, and an epoxy coated sensible flat plate heat exchanger. It is built for energy efficiency and long-lasting performance, while...

XeteX is the industry leader in providing innovative air handling solutions that meet demanding applications with performance and reliability. This featured project showcases a cutting-edge Indoor 90,000 CFM Custom Air Handling...

This featured XeteX project is a custom indoor Make Up Air Unit (MAU) specifically designed for a Military application. This custom MAU boasts a space-saving designed to suspend from the ceiling, saving valuable floor space. Yet...

What differences and benefits does a counter flow heat exchanger have over a cross flow heat exchanger for energy recovery?

Cross flow plate heat exchangers are available as sensible only or enthalpy—two heat transfer configurations of energy recovery ventilation system. Choosing one over the other depends on the specific requirements of the HVAC...

Energy Recovery Wheels are an effective ventilation product for commercial and industrial HVAC Systems. They improve indoor air quality while saving energy and cost.

This featured 40,000 lb. XeteX custom Energy Recovery Unit (ERU) is a comprehensive solution for a large mission-critical pharmaceutical lab. Equipped with an epoxy-coated Flat Plate Heat Exchanger and paired with packaged DX...

This featured XeteX project is a custom energy recovery ventilator with an enthalpy flat plate heat exchanger for an airport application.

This XeteX project features a Large Dedicated Outdoor Air System with Energy Recovery for a hospitality application.

This Xetex featured project is an indoor Dedicated Outdoor Air System (DOAS) with an enthalpy energy recovery wheel designed specifically for a K-12 educational facility. This innovative system ensures optimal indoor air quality,...

This XeteX project features seven custom Energy Recovery Units as part of a retrofit replacement for a School as a CARES Act energy recovery ventilation upgrade.

This featured XeteX project is one of eight high capacity ventilation Dedicated Outdoor Air System units with a flat plate heat exchanger designed for a casino to provide up to 30 air changes per hour.