Designed specifically for one of the nation’s largest lithium-ion battery manufacturing facilities, this XeteX project showcases one of 15 custom indoor air handlers. Each unit features 100K CFM utilizing Acoustiflo SA fans with integral inlet dampers; 2,411 MBH chilled water coil cooling; and perforation liners for sound attenuation.
PERFORMANCE
Model: XAH-100000-CW-RC
Dimensions: 144”H x 322”L x 216”W
Weight: 25,700 lbs
Supply CFM: 100,000 CFM
Cooling Type: Chilled Water Coil
Cooling Capacity: 2,411 MBH
CONSTRUCTION
- Indoor three-section split unit
- 3” double wall thermal break construction with injected foam (R-value 21) insulation
- 18ga galvanneal outer casing with acrylic paint
- 20ga galvanized interior casing
- 10” structural steel base frame with welded lifting lugs and acrylic paint
- 16ga galvanized unit floor with 2” injected foam (R-14) insulation
- 304 SS drain pan
FEATURES
- SA Acoustiflo fans with integral inlet dampers
- SA perforation liner for sound attenuation
- Piezo pressure port and fan backdraft damper
- Recirculation damper
- Modulating actuator
COMPONENTS
A. Filter pressure gauge
B. OA 4” MERV 8
C. Unit splits
D. Chilled water coils
E. SA Acoustiflo plenum six-fan array
F. SA fan back draft damper
Learn more about XeteX Custom Air Handling Units.
