Skip to content
All posts

Custom Indoor AHU with Wrap Around Heat Pipe & Corrosion-Resistant Design

This XeteX custom indoor air handler is suspended from the ceiling and is one of four units for a corrosion protection hangar. It features a pre-heat/pre-cool air-to-air ElectroFin coated wrap around heat pipe for energy savings. Plus, the all-aluminum design ensures lasting performance in a corrosive environment.

Custom Indoor AHU with Wrap Around Heat Pipe and Corrosion-Resistant Design

Performance

Model: XAH-5000-CW-HI-HTP
Dimensions: 61”H x 190”L x 66”W
Weight: 3,800 lbs
Supply CFM: 4,690 CFM
Pre-cool/ Re-heat Device: Wrap Around Heat Pipe
Cooling Capacity: Pre-cool: 29,845 BTU/h
Heating Type: Indirect Fired Gas Furnace
Heating Capacity: 306 MBH
Cooling Type: Chilled Water Coils
Cooling Capacity: 319 MBH

Construction

  • Indoor unit with thermal break construction
  • All-aluminum corrosion-resistant design
  • 2” double wall casing with injected foam (R-value 14/in) insulation;
    • 0.063 aluminum exterior casing
    • 0.063 aluminum interior casing
  • 6” structural aluminum c-channel welded base
  • 0.080 aluminum floors with PolyIso Foam (R- 6.0/in)
  • Aluminum drain pan

Features

  • ElectroFin coated air-to-air wrap around heat pipe with 3-stage capacity control
  • Unit design suspended from ceiling
  • SA plenum fan enclosure and fan inlet guard
  • Corrosion-resistant coating for SA fan; aluminum wheel, cone, and frame
  • Aluminum gas train vestibule
  • Hepvo trap and neutralizer tank

Components

A. Aluminum OA damper 
B. OA 2” MERV 8 with aluminum rack
C. Heat pipes Precool
D. Epoxy-coated stainless steel cased chilled water coil
E. Heat pipes reheat
F. SA plenum fan with Piezo flow ring
G. High efficiency (90%) indirect fired burner with modulating valve (20-to-1)

Indoor AHU Corrosion-Resistant Aluminum-Construction with Heat Pipe drawing

Learn more about XeteX Custom Air Handling solutions