ERV with Energy Recovery Enthalpy Wheel, Chilled Water & Hot Water Coils
This XeteX custom outdoor Energy Recovery Ventilator is a high-quality solution that not only helps buildings breathe better but also enhances overall indoor climate comfort and energy efficiency for a prestigious academic institution.
The custom ERV utilizes an 3Å molecular sieve desiccant wheel (8” deep) with low cross-contaminating seal system and purge sector to achieve an outstanding energy effectiveness up to 70%. The single unit includes hot water coils and chilled water coils for heating and cooling.
Specifications
Model: AVR-1400-RT-CW-HW-FF
Dimensions: 64”H x 84”W x 154”L
Weight: 6,150 LBS
Supply CFM: 4,263 CFM
Energy Recovery: Enthalpy Wheel
Energy Effectiveness: 70% Winter / 68% Summer
Heating Type: Hot Water Coil with Glycol
Heating Capacity: 331 MBH
Cooling Type: Chilled Water Coil with Glycol
Cooling Capacity: 296 MBH
Construction
- Outdoor unit
- 2” double panel casing with injected foam (R-14) insulation
- 18ga galvanneal outer casing with acrylic paint; 20ga galvanized inner casing
- Welded 6” structural steel base frame with lifting lugs with acrylic paint
- 16ga galvanized steel floor with 2” injected foam (R-value 6.9/in) insulation
- Aluminum access doors with 8” tempered glass windows
Other Features
- Full factory controls provided
- Factory testing: Airflow, pressure, casing leakage, sound, and unit testing
- Freeze protection thermostat
- SA and EA fan inlet guard
- SA and EA PIEZO flow rings
- SA and EA airflow monitor pressure only PIEZO transducers
Components
A. 2” MERV 8 OA filter
B. 12” MERV 14 SA filter
C. 3Å molecular sieve desiccant wheel (8” deep) with low cross-contaminating seal system with a purge sector
D. Hot water glycol heating coil
E. Chilled water glycol cooling coil
F. SA Fan Array
G. 2” MERV 8 RA filter
H. Recirc damper
I. EA Fan Array
XeteX helps buildings breathe better. Learn more about our custom energy recovery ventilation systems.